UVLED heating furnace, also called LEDUV curing furnace, where "UVLED" is the abbreviation of LED ultraviolet light, curing refers to the material from low molecular to polymer. UV curing generally requires coating (coating), adhesive (glue) or other sealant curing conditions or requirements, which are different from heating curing, curing agent (curing agent) curing, and natural curing.

The role and advantages of UVLED furnace equipment

1. The difference between UVLED lighting source and traditional high-pressure mercury lamp curing equipment

First of all: The production of traditional UV curing machines is very smart and bright. In fact, its spectrum is very wide, and it is really effective to cure a part of the energy of the UV spectrum, a considerable part of visible light (stray light) and heat generation, the operator's Serious eye damage can easily cause thermal deformation of the workpiece. B issued: UVLED furnace, high-purity single-wavelength ultraviolet light, which is a cold light source; workpiece temperature

The rise is only 3 degrees, and the workpiece is not deformed. It is the effect of highly concentrated energy to effectively cure the ultraviolet spectrum. The use effect and light intensity of 1000-2000 MW high-pressure mercury lamp curing effect and curing time are shortened to 0.5 to 5 seconds.

2. The UVLED furnace greatly reduces the production cost

A: Using LED lights, the lifespan can reach more than 25000 hours (continuous ignition life), using energy-saving design, only when lighting is needed, low power consumption, power: about 50W.

B: UVLED stove body small lamp, you can easily integrate it into the automatic assembly process, or use it as a complete desktop system.

C: The LED irradiation head is controlled by a computer, and you can select manual or automatic control operations according to actual needs, and set your own exposure time (accurate to 0.01) to further support the high-precision bonding needs and reduce human operation time errors. The UVLED furnace has almost no heat, is not fragile, and has no mercury; the maintenance cost is very low. UVLED equipped with a dedicated condenser lens assembly also makes it

The energy of the curing point is highly concentrated, which improves the curing efficiency. It can be 4 channels (each device can install 4 LED tubes) to increase the area. Without preheating, it emits high-energy ultraviolet light immediately. Using the latest high-energy ultraviolet light LED, it immediately emits high-energy ultraviolet light to quickly complete the curing of UV glue, which greatly improves production efficiency.

Application of UVLED furnace

UVLED furnaces are widely used in the baking of chemical gases and food processing industries, for baking food, substrate stress removal, ink curing, film drying, ceiling maintenance, glass wire screen, furniture surface curing surface, surface curing, etc. Widely used in electronics, electrical, communications, electroplating, electroplating, plastics, metal chemicals, food, printing, pharmaceuticals, PC boards, powder, dipping, spraying, glass, ceramics, wood building materials, etc., such as precision baking, drying, pre-treatment Heat, shaping, processing technology, etc.