The complete spray valve system includes 781RC-SS spray valve, VM8040

Single solenoid valve rubber valve controller, circulating pump, 1 liter storage tank and all

Need trachea and adapter. There are two nozzle specifications to choose from, such as

Shown below.

7013915 Rotary spray valve with 0.36 mm (.014") diameter nozzle.

Round narrow angle. All metal parts are passivated

303 stainless steel.

7013769 is the same as #7012744 rotary spray valve, with a diameter of 0.71 mm (.028") nozzle. Round and narrow angle. All metal parts are made of passivated 303 stainless steel.

For fluids that do not require circulation, please select MM781-SYS, as shown below.

7023895 contains spray valve, VM8040 controller, solenoid valve and 1 liter storage tank.

Circulating spray valve 781RC-SS

The 781RC micro-point circulating spray valve system can spray 5 mm to 30.4 mm circular and striped patterns without nozzle clogging and overspray.

This unique spray system effectively prevents nozzle clogging. Its particularity is that the additional circulating pump ensures the uniform mixing of precipitated substances during the entire operation of the valve; at the same time, the separately set atomization pressure delay function can prevent nozzle blockage after each spraying and reduce the number of maintenance. And reduce downtime.

This system can be used to mark and distinguish similar parts, mark inspection pass/fail products, or indicate production/test status, etc. The system can be used for manual operation or in conjunction with other platform systems.

Features and advantages

Will not clog nozzles, drip or dry up fluid

Ensure uniform circulation of pigment

Will not overspray or produce oil mist

Accurate positioning, consistent glue output

Specifications and parameters

V valve

Dimensions: 104.6 length x 26.9 diameter mm

(4.12" x 1.06") inches

Weight: 235.3 grams (8.2 ounces)

Starting air pressure: 70 to 90 psi (4.8-6.2 bar)

Maximum fluid pressure: 300 psi (20.7 bar)

Inlet thread: 1/8 NPT female thread

Fixing method: (1) 1/4-28 UNF hole

Working rate: more than 400 times/min

Cylinder shell, fluid tank, gas cover, piston, firing pin and needle nozzle: 303 stainless steel

Firing pin seal: PTFE all stainless steel is passivated pump circuit

Dimensions: 25.4 length x 20.3 width x 10.2 depth cm

Weight: 6.5 kg (14.6 lb)

Input power: 100-240VAC 50/60 Hz power supply

Pump

Flow rate: up to 88 liters/hour

Weight: 0.4 kg (13.6 ounces)

Input power: 24 VDC 2.0 Amp maximum

Fluid contact parts:

Pump body: 303 stainless steel

Gear: PEEK

Gasket: PTFE